Own Design Pendant in Stl and Obj Format

Own Design Pendant in Stl and Obj Format 3D print model

Own Design Pendant in Stl and Obj Format

Attention: The files delivered in the download are in Stl and Obj format.

This pendant was inspired by a 9 mm Brazilian amethyst.

As one of my passions is to create, I use the software to bring my desires to fruition, and then I can share it with everyone.

The gemstone is held by a ring that works as a support for the gemstone, with a hole which allows the light to pass through in order to elevate the stone.

The secondary gems have a diameter of 2 mm in round cut held by taps strategically placed in order to achieve a solid hold that a piece of fine jewelry deserves.

All the pieces were designed in parts in order to be able to work them better and give a better final finish.

The voluptas are inspired by Quilmes Centro, Argentina where Bellas Artes Carlos Morel is located.

And the Base of a Quilmes Window from a 1930's Vintage construction.

All these combinations of everyday life resulted in this pendant.

Weights of the piece:

18k Yellow and Red Gold

10.6 grams

14k Yellow and Red Gold

9.8 grams

White Gold

10.5 grams

Platinum 950

15.75 grams

Silver 925

Weight 10 grams

Everything designed here is of my own authorship.

All models created, designed and prototyped here were before being published tested for successful reproduction at your place of residence.

Item rating
0 0
Own Design Pendant in Stl and Obj Format
$25.00
 
Royalty Free License 
Own Design Pendant in Stl and Obj Format
$25.00
 
Royalty Free License 
Response 100% in 3.6h
3D Modeling
Rendering
Hire me

3D Model formats

Format limitations
  • OBJ (.obj, .mtl)4.86 MB
  • Stereolithography (.stl)2.79 MB

3D Model details

  • Publish date2022-06-15
  • Model ID#3801457
Help