If you ever needed a moment to slow down or take a mindful pause from distractions, this little mini zen garden may help you do just that. Files provided for both the zen garden box and the rake. All you need to do is add some fine sand and your zen garden will be ready to go.

Recommendations for 3D Print (Based on Bambu Lab specs):

• Filament - PLA (example photo shown uses Black and White PLA Basic)
• Scale - Maintain its original scale and dimensions (Garden Box: 122.07mm x 126.42mm x 48.69mm; Rake: 15.06mm x 36.28mm x 100.18mm)
• Layer Height - 0.1mm
• Default Line Width - 0.32mm
• Seam Position - Nearest
• Ironing Type - Top surfaces
• Sparse Infill Density - 15%
• Slow down for Overhangs - Yes
• Enable Support - Yes
• Support Type - Tree Organic
• Threshold Angle for Support - 30 deg.
• Support Critical Regions Only - Yes