Cute skull with swirl design. Original scale of skull can fit one electric tea light (~36.5mm in diameter and ~18.5mm in height). Can be scaled up to 175% of its original scale to fit larger items. Please keep in mind that smaller items (e.g. halloween candy, etc.) may fall out of the eye sockets, depending on the size of the print and size of the item(s).
Recommendations for 3D Print (based on Bambu Lab specs):
- Filament - PLA (example photo shown uses White PLA Basic)
- Scale - Can be re-scaled between 100% to 175% of its original scale (original scale: 78.23 mm x 82.34 mm x 55.42 mm). If kept to original scale, the skull has enough space to fit an electric tea light ~36.5mm in diameter and ~18.5mm in height.
- Seam Position - Nearest
- Layer Height - 0.1mm
- Default Line Width - 0.32mm
- Ironing Type - Top surfaces
- Sparse Infill Density - 15%
- Slow down for Overhangs - Yes
- Enable Support - Yes
- Support Type - Tree Organic
- Threshold Angle for Support - 30 deg.
- Support Critical Regions Only - Yes
