Praetorian guard Helmet The Mandalorian

Praetorian guard Helmet The Mandalorian 3D print model

Description

This is a digital 3D printable model of the Imperial Praetorian guard Helmet from T*he Mandalorian.*

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time. The parts are connected via pins that can also be printed. We recommend using a black plastic sheet to create the eye shield. This 3D model is meant to be used as a wearable cosplay helmet.

SIZE At 100% scale, the mask’s dimensions with tubes are approximately:

-Width 205 mm -Length 207 mm -Height 260 mm

You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit, but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS We use these settings for most of our prints: Layer height 0.15 mm Infill 15% Supports 45° For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible. This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations on our social media.

Item rating
0 0
Praetorian guard Helmet The Mandalorian
$27.00
 
Royalty Free License 
Praetorian guard Helmet The Mandalorian
$27.00
 
Royalty Free License 
Response 97% in 15.2h
3D Modeling
3D Print Modeling
Low-poly Modeling

3D Model formats

Format limitations
  • OBJ (.obj, .mtl)22.6 MB
  • Stereolithography (.stl) (2 files)45.2 MB

3D Model details

  • Publish date2023-04-27
  • Model ID#4464179
  • Ready for 3D Printing
Help
Chat