Phase 1 Trooper helmet with attachments 3d print file 3D print model

Accurately designed helmet based on a combination of clone wars and Kenobi. This is a fan made replica model, and neither myself nor this product is affiliated with Star Wars or Lucasarts.

3d file in .stl format for 3d printing with all added detail from game textures.

Includes helmet file with visor, visor mold (visor print sits on mold), attachment caps, details, neck seals, large antenna (used by Kenobi figure), bacara style up armor, Cody attachments, top fin, flashlights, top head armor, macro binoculars, new style range finder, classic range finder mounted on outside, and classic range finder mounted on inside.

The removeable neck seal uses a total of 16, 10x3mm magnets.

Helmet files are scaled roughly for a 5ft 10in individual, but highly recommended to re-scale corresponding to your specific needs. The dimensions of the base helmet without fin or neck seals are 12.57in (or 31.92cm) tall, 12.33in (or 31.3cm) long, and 9.93in (or 25.22cm) wide. The head opening without neck seal is 8.18in wide and 10in long.

The visor can be either be printed in a see through resin or vacuum formed with the visor mold. Keep in mind the visor files provided are a 1-1 scale, if you are going to do a vacuum form I would shrink the visor mold slightly to allow the molded plastics thickness.

Feel free to message me directly if you have any questions. Printer too small? I would recommend a slicer software for your printer, PrusaSlicer is free and easy to use. It can cut your model into smaller bits as well as any filament or printer tweaks before you print.

Interested in printing and selling my designs for your business? Please visit: https://www.patreon.com/TitlewaveDesignsBusiness use Patreon membership is available, note this only gives access to sell physical prints while the membership is held, no digital file selling is allowed.