OO MK2 and MK2A Coach Bogie with NEM Socket to fit Hornby Coach 3D print model

Designed for older Hornby Coaches to replace existing bogie with a version that has a NEM socket.

The bogie has been designed considering strength against accuracy. If I had produced bogie 100% accurate it wouldn't be strong enough to use, so hopefully I have got a good balance between strength and accuracy. The bogie has been designed to replace the bogie on a R4153/R4154 coach but will fit other Hornby coaches with the same bogie design.

Example in photos was printed on an AnyCubic Photon Resin Printer Recommend soaking in IPA after printing to help remove resin in holes where wheels go, once fully cured these holes may need to be drilled out slightly to enable free running. Also some filing maybe required after printing to remove printing supports.

For a smooth running these might be helpful https://www.dccconcepts.com/product/bearing-reamers-set-of-two/

The wheels shown in photos are for reference use only and not included. 12.6mm replacements metals wheels are recommended. Kadee Coupling used in photo is a No18

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design and develop new items for me to share. For £2 a month you will give me basic support and for £4 you will get insight into my new designs and be able to contribute with my future projects.