TWO TREE BLUER RAIL LINES BED KIT-1

In order to be able to assemble the table as shown in the “Bed Super Upgrade-video 4”, it is necessary to use kit 1. This kit consists of a series of parts, printed and manufactured. With information on what the kit is made of and links to additional parts that must be purchased separately.

Note:

The kit is designed and produced for a Two Trees Bluer 3D printer, but it has to be original from the factory. There are two ways to buy Kit 1 (the printed parts). They read or download the STL files and in this case screw and nuts, sold separately.

Bed – Y axis

• (2) two trees bluer axis Y - Bed line rail carriage adapter (Left and Higth)
• (1) Two Tree Bluer Y axis endstop support
• (1) JIG
• (1) Profile Fixed Block For MGN12 Rail Linear Guide

IS NOT INCLUDED:

• (4) M5 20mm screw w/lock nuts or or you can use the original screws which are bigger
• (1) M5 40mm screw
• (1) M5 nut
• (1) M5 lock nut
• (2) M4 20mm screw
• (8) M3 8mm screw
• (2) Rail Line MGN12 and carrige MGN12H w/ 325mm

Links:

Rail line MGN12 w/325mm and carrige MGN12H: https://s.click.aliexpress.com/e/_Dd0bGsf

Video:

https://www.youtube.com/watch?v=IZ3SFzEYWo4&list=PLcqEw_QOIzp0GJz2S_vVFvadNFHx1Syr5&index=5

Contact:

mybestcnc@gmail.com