Mjolnir from Thor and Love and Thunder 3D print model

ABOUT THE PROJECT

Scale inspired by the officially used prop.

Included are:

• Regular Mjolnir - I created the body so its easy to print without supports, and added structural strength. There is a 10mm dovel intended for the hilt, and 8x8 pins or magnets to be used at your own discretion depending on what you would like more :)

Love and thunder Mjolnir ( both damaged and with holes for lights) - once again 8x8 pins or magnets - i recommend you close one side with pins and leave the other one to be used with magnets so you can access the electronics.IF you don't wish to use any lights on the inside, just print the damaged one without holes

regular and L&T for small scale resin printing - yup 1:6 scale made for resin printing. The opening on the hilt for the strap is still there, so if you can find some small straps you will get yourself some nice keychains :)

desk stands - 3 versions

Join our community and find out more at:https://www.facebook.com/groups/3282336185171090

or follow me on instagram:https://www.instagram.com/mysterymakers_3d/