A woderful Hobby

This package contains the 3D model of an elvish house for a Christmas Village. It includes two main STL files:1) The house model - Designed as a single piece (supports are requeired for proper 3D printing). The inside is holow so that the house can be iluminated.
2) Automation Box - Contains two pieces, the box and the lid. The box is designed to fit precisely under the house and the cylinder in the lid to hold the LEDs. There's a hole in the front wall of the box to fit in a female power connector or a push botton.

I used a combination on 1x Arduino nano 33 IoT, 1x ULN2003a and 4x RGBs LEDs to simulate the lighting of the house. Since i have an MQTT broken in my LAN, I was able to subscribe the arduino to key topics in the broker so that the module could be controlled remotely from an cell phone or a PC. I'm able to play with RGB color combinations, brightness and ON/OFF status.