rev. 20211227 (27-12-2021)
Printable Buoy type B for scale model ships (accessory for buoy lying vessel or standalone as display or floating).

Scale: (1-50, 1-40, 1-32, 1-25).

For 3D print.

Printing requirements: ABS printer, resin printer for detailed partsOther material required:

• M12-M24 galvanized nuts (depending on scale)
• gyps or concrete for ballast

Dimensions (depends on scale):diameter 32-64 mm
Height 70 mm

Printing: FDM printer with NOZZLE 0.4mm, material ABS (ABS shrinks after cooling down and parts are already upscaled to compensate for this shrinkage!), layer 0.1mm, no support , no brim, 20% cooling from layer 4 upwards is recommended (or better required)
Resin detail printer for resin parts (not containing ABS in it's filename), you need to properly orient the parts and generate supports and plate to successfully print them.
For assembly a glues for ABS plastic and epoxy for resin parts are needed (for eg. Revell Contacta for ABS-ABS and UHU Plus or any other epoxy).

PDF instructions included.

A full kit is also available if requested (all parts printed + all additional required parts, without motor). Please write me a message.

More details, photos and info: https://www.zonerama.com/jsyrovat/Album/7787852