PLEASE make sure your 3D printer is able to print a minimum size of 180x220x158mm before purchasing.

Aftermarket front shock towers and panhard mount are required. All inner fenders need to be removed before installing.

Expeditions can be comfortable! The all new G90 6x6 Expedition Suite was designed to work specifically with the** G90 Sleeper Cab (sold separately)** in 6x6 configuration.

This beast of a combo was made for the TRX6 in the wheelbase of 324mm from front to middle axle, and 454 from front to rear axle. Trail ready mounts are included. Prepare to turn heads!

The 6x6 Expedition Suite isn’t just a 4x4 expedition cabin on 6x6 fenders. The 6x6 Expedition Suite has been stretched, with new details added and a new, more stable and beefy mounting method to the Sleeper Cab.

Similar to the G90 Sleeper Cab, the 4x4 Expedition Suite works best with 120mm diameter tyres, with outside tyre to tyre width of 220mm. A wider set of fenders are included for a more aggressive stance of 240mm in width.

Be sure to check out the instruction manual and gather all required hardware for assembly.

The G90 6x6 Expedition Suite comes packed with features and includes scale accessories to match the look.1/10 scale functional traction boards with storage mountsRadio antenna of 2 different lengthsFuel canSmall accessories boxPower socket cap with rain shieldModeled air ventsFunctional cab side blinkers for 3mm LEDs (4x orange)Functional rear lights for 5mm LEDs (2x red 2x orange, 2x white)Functional door with included hingesStandard width and extra wide fenders (220mm and 240mm widths)

Please ensure your printer can print a volume of 180x220x158mm.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

.DXF files for all windows can be found here:https://www.aheadrc.com/dxf-files

Should you need any help, please do not hesitate to contact us!

FDM printing:

Requires a printer that can print a minimum volume of: 180x220x158mm.

PETG filament0.2mm-0.3mm (0.4mm nozzle) layer heights20-30% infill densitySupports are necessary

Finished and assembled size:328*218*177mm (All parts assembled excluding rear bumper and mirrors)