Welcome to this page, here you get a printable bottle holder for the Nissan NV200 Center Console.

I was always a little unhappy with the serial center console of my Nissan Bus, so I decided to create something that better fits to my use.

If you look at the console, there is a big space with quite flat side panels, so that you cannot put a lot of stuff there, especially no bottles, as they will fall over and then they are in the area of your feet, which can get really dangerous.

It is designed to carry 1.5 liter bottles with a diameter of ~90mm. The holder itself has 95mm inner diameter, just to be very clear. It is designed for LHD, but when mirrored it should also suit for RHD.

So here for the first shot, we will simply print three parts, glue them together and replace one of the four parts of the stock console. You will get a short PDF as well with some more images and description.

Oh, by the way:

--> Please make sure to follow one of the descriptions how to remove the console from the internet, because it is a little tricky and you might damage some parts on your vehicle while removeing the console - be carefull, everything is at your own risk!

--> And one more: I do not know your regulation in regards to modification of the car - so all you modify it at your own risk!

--> If you think, 20$ might be too much for just three parts - it took me quite some time to create all the parts, fitting dimensionally to the rest of the vehicle environment, being printable on a usual home-3D-printer, defining the split lines and designing something new - so you're not just buying three models, but also the work behind. Thanks for your purchase!

PS.: If there is the need to get more data-formats, just let me know.