Rabbitbot 3D print model

3D MODEL DESCRIPTIONHopping into action, mech style!● This STL file is recommended for FDM Printers!● 3D Printing Time Based on Ender 3: 20 Hours 57 Minutes (will vary accord to you printer model)● Approximately Height: 5,6 cm3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s(All the other layers on Bambu Lab)● Recommended Initial Layer Height: 0.2 mm● Recommended Layer Height: 0.2 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 10% (Gyroid)● Needs Support: Yes.● Build Plate Adhesion: No.The parameters above are recommendations made by our staff; if you prefer, you can adapt themaccording to your preferences.Happy Printing!