3D MODEL DESCRIPTIONThe man of proportions now proportionally in 3D. Vitruvius would be proud.● This STL file is recommended for FDM Printers!● 3D Printing Time: 19 Hours 34 Minutes● Approximately Height: 21,3 cm3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500mm/s (All the other layers on Bambu Lab)● Bridge Speed (Bambu Slicer): 50 mm/s (Just for the bridge parts)● Detect Thin Wall/ Print Thin Wall: Yes.● Recommended Initial Layer Height: 0.20 mm● Recommended Layer Height: 0.20 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 3% (Gyroid)● Needs Support: No.● Build Plate Adhesion: Skirt.The parameters above are recommendations made by our staff; if you prefer, you can adapt themaccording to your preferences.Happy Printing!