Iron Man Briefcase Case 3D print model

Iron man briefcase
Size is around 25cm x 17cm.
It uses the following parts:
Up to 11 5x2mm magnets - Its quite strong with 11 magnets so I would suggest starting with 4 and then seeing how many you need. Add them at the end of assembly
10 M2x10mm self tapping screws
6 M2x10mm nut and bolt - optional but if holes are there if you want a bit more strength. It works fine without them.

Assembly Instructions:

Fit the top shell parts, 2 red parts and 1 silver part per each side. They press fit together. You can add your m2 nut and bolts here if you like.
Add the side, hinge and top pieces, screw them in with the M2 self tapping screws.
Hinge is print in place and should break free with a bit of force. Needs to be loosened up by moving it around a bit and will eventually be quite free
Assemble the side parts, they snap fit together and they snap into place to the holes on the red shell. See the assembled photos for their orientation
For the rectangle pieces match them to their numbers.
Add three magnets are first to check the strength and then add any extras as needed. They should press fit it but if they are loose you can add some superglue underneath.