handy3dzz 3d Nunchucks

Please read this text before printing for designs, descriptions, advantages, dimensions, weight, print settings and warnings.

Designs/Descriptions/Advantages

• No Assembling Needed.
• Chains are located and printed inside of each other.
• On a single printing, it is ready for action.
• It is a toy for around 15 % fill factor and 4 or 5 vertical layers(or is it?). You get more serious by increasing these numbers. You are dead serious with metal printing.
• Yes, it hurts.
• Yes, it can be very competent.

Print Settings

• At least 4-5 vertical layers should be entered since you want competent chain.
• Support utilization is needed in your printing settings. It is tested with 7 layers of brim with 240 oC first layer temperature for PLA, works just fine. However, support for the first 20+ layer is a good choice too.

Please mind

• Check plenty of useful stuff on >>>handy3dzz<<< that you can use in your work, home, garage or laboratory. All of them will save your money and you can print infinite amounts. Even if you are able person who knows how to design them, don’t waste days and weeks that otherwise, you can use on your precious projects. Just buy from Handy3dzz. New handy stuff will be added day after day. Therefore, please follow on twitter( http://bit.ly/3CBXXdm ) and instagram ( http://bit.ly/3uaZXWr ).
• Please let us know if you have any inconvenience with the product so it can be fixed and the fixed version will be sent to you immediately.
• Please note that the model is printed and tested with awful and cheapest 3d printers and PLA filaments with mediocre printing settings.
• This file is an asset in memory of your 3d printer, therefore, treat it accordingly.