3D MODEL DESCRIPTIONHello friend, today on my profile, I wanted to share with you, a very simple keychain Batman-themed articulated.

I drew two, one empty in the center, really very nice, and one with full filling, the dimensions are 97 x 32 x 5 mm, it has a hole to insert a chain and be able to hang it on the keys.

Besides you have keychain, I also inserted the two rows without the holes.

Really very easy to print, just need a support, only and exclusively, for the keychain hole, after all you do not need large settings, besides, I leave you in the image section, my parameters to get perfect prints.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

3D PRINTING SETTINGSLayer 0.10 / 0.15Temp. 205° / 50° PLAInfill 10%Top and Bottom Layer 4Perimeter Layer 3Support View PicturesSpeed 50/60 mm/s