Channeling dark magic and otherworldly elegance, *the Necromancer Shoulder Plates * feature intricate details such as bone-like protrusions, arcane symbols, and a sinister aesthetic. Ideal for cosplay, fantasy LARP, or display as a striking decorative piece.

Printing Instructions

Preparation:

Measuring Fit:

Shoulder Width: Measure the distance from the edge of one shoulder to the other.

Shoulder Circumference: Measure around the thickest part of your upper arm and shoulder to ensure proper sizing.

Add a slight allowance (1–2 cm) for comfort and adjustments.Printer Settings:

Layer Height: 0.12–0.2 mm to retain intricate details.

Infill: 15–25% for lightweight durability.

Supports: Necessary for overhangs and complex features.

Material Recommendations:

PLA or PETG for robust construction and ease of finishing.

ABS for enhanced durability and heat resistance.Post-Printing Instructions

Sanding and Refinement:

Smooth the surfaces with fine-grit sandpaper, ensuring no sharp edges remain.

Painting:

Use a matte black primer for a base coat.

Highlight bone-like textures with dry-brushed white or gray tones.

Apply glowing effects with metallic or fluorescent paints to emphasize arcane symbols.

Fitting:

Attach using leather straps, buckles, or elastic bands for a secure fit.

Consider adding foam padding underneath for comfort during extended wear.

Use a hair dryer to gently warm and adjust fit if needed.

Finish:

Seal with a matte or satin clear coat to protect the paint and give a polished look.