Jujutsu Kaisen - Gojo Satoru LED Lightbox 3D print model

Gojo Satoru - LED Lightbox - Printing Instructions Included

All the necessary printing instructions are included in the file.If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice.Also, make sure to have a strip light of your choice for the lighting.

For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Gojo Satoru ! - LED Lightbox

Note to always put the transparent layer last

LightBox Frame Settings:Layer Height: 0.2Walls: 2Bottom: 2 (Or 3 to hide infil lines)Top: 215% Infil

LightBox Back Plate Settigns:Layer Height: 0.2Walls: 2Bottom: 3Top: 310% Infil

LightBox Transparent Layer:Layer Height: 0.2Walls: 2Bottom: 2Top: 21% Infil

Design Layer Settings:Layer Height: 0.22 Walls2 Top/Bottom3% InfilNo supports.