Majin Buu - LED Lightbox - Printing Instructions Included

All the necessary printing instructions are included in the file.If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice.Also, make sure to have a strip light of your choice for the lighting.

2 Options included inside. Separate file for the tongue if you want to make it lime green instead. If not you can use the combined file with the light blue version.

The order assembled is showed in the pictures above!

Enjoy!!

For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Majin Buu! - LED Lightbox

LightBox Frame Settings:Layer Height: 0.2Walls: 2Bottom: 2 (Or 3 to hide infil lines)Top: 215% Infil

LightBox Back Plate Settigns:Layer Height: 0.2Walls: 2Bottom: 3Top: 310% Infil

LightBox Transparent Layer:Layer Height: 0.2Walls: 2Bottom: 2Top: 21% Infil

Design Layer Settings:Layer Height: 0.22 Walls2 Top/Bottom3% InfilNo supports.