Woolly Rhinoceros Bust 3D Model STL Printable 3D print model

A powerful bust of the extinct woolly rhinoceros (Coelodonta antiquitatis), showing its massive horn, thick hide, and characteristic heavy jaw. The sculpt captures rugged texture detail in the skin and folds, ideal for paleontology displays, fantasy art pieces, or decor. The model is watertight and ready for STL export, suitable for both FDM and resin printing.

Printing Details:

Printer Type: FDM or Resin

Layer Height / Resolution: 0.1‑0.2 mm for FDM; 0.05‑0.1 mm for resin to capture finer skin texture

Infill: ~20‑30% (gyroid or cubic for strength without too much material)

Walls / Shells: 2‑3 perimeters, with thicker shell on horn and rigid areas

Supports: Needed under chin, horn overhang, ears, and rear of bust

Material: PLA or PETG for FDM; standard or tough resin; optional flexible filament for accent textures

Build Plate Adhesion: Use brim or raft especially for heavy or large bust to prevent warping

Hollowing & Drain Holes: If printing large, hollow interior with ~2‑3 mm wall and add drain holes for resin or material savings

Post‑Processing: Sanding/filling joints, optionally priming & painting to highlight texture; resin prints may require washing & curing