Bring the brooding atmosphere of the Necropolis to your shelf or tabletop with a designed for clean printing and striking display.

What’s inside

necropolis_1M_DECIMATE.stl — ~48.5 MB
Decimated ~1M-poly mesh for quick slicing and reliable FDM prints. Ideal when you need low memory use without losing the silhouette.

necropolis_4M_DECIMATE.stl — ~211 MB
Decimated ~4M-poly mesh for crisper edges and ornamentation. A balanced choice for large-scale FDM or standard resin prints.

necropolis_41M_VOXEL.stl — ~2.06 GB
Ultra-dense ~41M-poly VOXEL variant for maximum surface fidelity (close-ups, big resin displays, or kitbashing). Heavy file—use a capable workstation; consider splitting before slicing if your software struggles.

Key features

• Recognizable Necropolis profile with spires, arches, and layered roofing—reads well from tabletop distance or on a display shelf.
  
• Three mesh densities included:
• Print-friendly geometry:
• VOXEL mesh for customization:
• Scales cleanly:
• Painter-ready surfaces:
• Slicer-agnostic workflow: Tested in Bambu Studio; also slices well in PrusaSlicer, Cura, Lychee, etc.

Printing tips

• Start with 1M or 4M DECIMATE for test fits and layout; move to 44M VOXEL for final high-fidelity resin or when you plan complex cuts.
  
• For FDM, use 0.12–0.20 mm layer height and enable tree/organic supports only where needed (spires/overhangs).
  
• For resin, anti-aliasing and small layer heights will maximize the fine trim and masonry.
  
• Consider splitting tall sections for safer prints and cleaner support removal; add alignment pins if you kitbash.
  
• Scale freely—higher density preserves micro-detail but increases RAM usage and slice times.

Notes

• All files are standard .stl. Choose the scale that fits you
• If you need a pre-split or lower-poly version for a specific printer, feel free to reach out.

If you have found that project good, here is a page where you can buy me a coffee and vote on what i will do next: https://ko-fi.com/thesunshinedude

Or just drop a like on my artstation: https://www.artstation.com/lukasz_kiebala

Support and request:kiebalalukasz2@gmail.comhttps://discord.gg/6NKQtxDTGQ

Best regards, Sunshine