***Elephant Wall Decoration Medium (approx. 50cm) - 3D Print Model*3D Print ModelHigh-Polygon Head Model**

PrintingThis model presents a slight challenge but is not difficult to print. It has been printed and tested by us beforehand.

The parts with the ears and the trunk should be printed with small, fine supports (only a few supports needed). The teeth are best printed with normal supports and a threshold angle of 30 degrees.We printed the model using matte PLA.

Files - CUT:Elephant_Head_Back_Bottom.stlElephant_Head_Back_TOP.stlElephant_Head_Ear_left.stlElephant_Head_Ear_Right.stlElephant_Head_Front.stlElephant_Head_Front_Bottom.stlElephant_Head_Front_TOP.stlElephant_Head_Front-Trunk.stlElephant_Head_Teeth_Left.stlElephant_Head_Teeth_Right.stlStandard-Plate_for_Objects.stlWall_bracket_Standard-Spacing22mm.stl

The package includes a pre-sliced model for large-format printing. It is sliced in a way that requires minimal support structures, making the print as simple as possible.

License Information:These files are available under the Royalty-Free License. This means that printed or otherwise created versions of this model cannot be used or sold for commercial purposes.

If you wish to use the model commercially, you can purchase the corresponding commercial license by selecting the commercial use box when purchasing. Sharing the STL files is not permitted.Watermarks and Modifications:The original STL file and modified versions may not be altered or sold, as they are protected with a digital, invisible watermark.If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to dialogue and is happy to discuss any modification requests.

Note for BusinessesAs a customer, you are responsible for complying with the license terms and ensuring that the use of the model meets your needs and the license requirements.

Design + Copyright: Bernhard QueißerQU3D.deCountry of Origin: Germany