Coffee service inspired by the Yuanyang II porcelain sculpture by Jonhson Tsang optimized for 3D PRINTING

Perfect for a romantic invitation

the project is designed for a standard Cartesian with 220x220x250 print volume (type Ender3, U30, etc.).if you wanted to reduce it, pay attention to thin walls during slicing (that is, they do not become too thin). for those wishing to enlarge it there are no contraindications.

the tray has 210x210 sizes while the faces have a height of 240mm.

Basically free-support project. necessary supports with overhangs of 65 °. the splash part in practice is exempt. the supports are required for the chin part and a little bit here and there.

Two versions of the faces are provided:

v1) sugar holder (he) and milk jug (lei). - see .obj file

v2) only faces with splash part instead of the above mentioned accessories. - see .stl file

The cup is merely display. use ceramic cups, especially with hot coffee;)The printed pieces shown in the photos do not have any type of post production. Only the supports where present are removed.

gold and silver filament: pla silk filoprint

powder filament: pla silk hobbyking

nozzle 0.4print at 40mm / slayer 0.15

file in .obj format (.stl on request ... but much is the same)

I think that's all