Meet our charming Chubby Cheek Squirrel! This delightfully stylized model captures the playful spirit of a squirrel with its smooth, inviting curves and an expressive, closed-eye pose. Optimized for easy FDM and Resin 3D printing, this little fellow is designed to be a quick, fun print that comes out beautifully. Perfect for brightening up any desk, shelf, or as a thoughtful gift for animal lovers and nature enthusiasts!

• Setting,Recommended Value / Detail
• Machine Type,FDM (Fused Deposition Modeling) or Resin (SLA/DLP)
• Material,FDM: PLA (Excellent detail, easy to print). Resin: Standard Grey/White (Superior detail).
• Nozzle Size (FDM),0.4 mm (Standard)
• Layer Resolution,FDM: 0.16 mm (Good balance of speed and detail) or 0.12 mm (High detail). Resin: 0.05 mm (Standard).
• Infill Density (FDM),10-15% (Sufficient for decorative use)
• Print Speed (FDM),40-60 mm/s
• Supports,Minimal Supports Required. Only needed under the tail overhang and potentially a small amount under the chin/arms depending on orientation. Consider tree supports for FDM.
• Raft/Brim,Brim (FDM) recommended for stable bed adhesion.
• Estimated Print Time,FDM: Approx. 4-7 hours (at 0.16mm). Resin: Approx. 2-4 hours (at 0.05mm).

• Assembled Size,120 mm (H) x 80 mm (W) x 60 mm (D) (Approximate - Scalable)Post-Processing Steps:

  Support Removal: Carefully remove any necessary support material. The smooth surfaces should make this relatively easy.

  Sanding (FDM): Light sanding with 220-400 grit sandpaper can smooth any remaining layer lines, especially on the main body.

  Curing (Resin): Wash and post-cure according to your resin manufacturer's instructions.

  Finishing (Optional): This model looks great in a solid color, but can also be primed and painted for more realism or artistic flair!

Assembly Guide:

This model is designed as a single-piece print and requires no assembly.