WARDEN SWORD - GHOSTRUNNER SWORD FOR COSPLAY 3D print model

All files are in STL format.

Model printed in parts.3 cutting variations for sword printing are available:

CUT TYPE 1 - STL file with the blade made for full printing (Only the blade) the cylinder that fits into the base of the blade is also separated for better printing.. The cable is separated and cut into two parts so that the trigger fits together with the pin.

CUT TYPE 2 - STL file with the blade divided into 4 parts and the handle divided into 4 parts too, with pins to fit them together. The cylinder that fits into the base of the blade is separated and the trigger is the same as the CUT TYPE 1.

CUT TYPE 3 - STL file with the blade divided into 8 parts and the handle divided into 4 parts with pins to fit them together. The cylinder that fits into the base of the blade is separated and the trigger is the same as the CUT TYPE 1. (Important: This cutting model for 3D printing was made with a vertical cut to divide the sword in half). Perfect for small 3D printers.

UNCUT - Full sword.

Size: 929,61mm (92,96cm)

OBS: The trigger was made to be pressable in all cutting versions. I recommend gluing a metal spiral spring to the inside of the handle (There is a space inside the handle prepared for this purpose).

The STL files are able to be printed as a cosplay item.

This model is a dummy replica item for cosplay.

-For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Warden sword was made for fans of the game Ghostrunner and also for everyone who likes swords in general. It can be used for both display and cosplay.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference!If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.