ULTRASEVEN GUITAR - COSPLAY 3D print model

Model inspired by the guitar 50 years anniversary of TSUBURAYA.

All files are in STL format.

Model printed in parts:

GUITAR: 2 types of cuts were made. Both cut versions have 2 variations of neck and head. (ATTENTION: the strings are merely illustrative with the function of showing that real strings can be fitted into the guitar to stay more faithful to the real version. Remembering that the guitar is a dummy replica without the intention of being functional)

CUT TYPE 1 - Uncut body and uncut neck with many small details.

CUT TYPE 2 - The body has been divided into 5 parts in the best way so that it does not damage the details both on the front side and the back, the neck was divided into 3 parts and it has the same amount of small details as the cut type 1.

Note 1: I recommend printing the details on resin for a better result.

Note 2: The silhouette of the Ultraseven on the back side of the guitar was made in low relief. Be careful when printing so that the details are not damaged.

Size: 1196mm (119cm)

The STL files are able to be printed as a cosplay item.

-For stable 3D printing, I recommend using the Bambu Studio software.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference! If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.