THE UNDOER - GHOSTRUNNER 2 SWORD FOR COSPLAY 3D print model

All files are in STL format.

Model printed in parts.3 cutting variations plus 1 uncut variation for sword printing are available:

CUT TYPE 1 - STL file with the blade, the handguard, the handle and a single pin (MID_PIN) to fit all parts.

CUT TYPE 2 - STL file with the blade divided into 5 parts, the handguard divided into 2 parts and the handle divided into 2 parts too, with pins to fit them together.The pieces of the blade fit each other, except the tip part (THE_UNDOER_BALDE_PART_1 and THE_UNDOER_BLADE_PART_2).

CUT TYPE 3 - STL file with the blade divided into 10 parts, the handguard divided into 2 parts and the handle divided into 4 parts with pins to fit them together. The pieces of the blade fit each other, except the tip part (THE_UNDOER_BALDE_PART_1 and THE_UNDOER_BLADE_PART_2). (Important: This cutting model for 3D printing was made with a vertical cut to divide the sword in half). Perfect for small 3D printers.

UNCUT - STL full uncut.

Size: 1253mm (125cm)

The STL files are able to be printed as a cosplay item, display item, mini figure item.

This model is a dummy replica item.

-For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the The Undoer sword was made for fans of the game Ghostrunner 2 and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference!If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.