REBELLION - DMC ANIME 2007 - COSPLAY AND FIGURE 3D print model

• All files are in STL format. Some files may be compressed in RAR.

• Model printed in parts.

*CUT TYPE 1 *- STL file with the blade part, the handle and 1 pin.

CUT TYPE 2 - Blade splited into 6 parts, the handguard splited into 3 parts, the handle, the pommel and the pins.

CUT TYPE 3 - Blade splited into 12 parts, the handguard splited into 4 parts, the handle splited into 2 parts, the pommel and the pins.

UNCUT - STL full uncut.

Size: 1448mm (144cm)

The STL files are able to be printed as a cosplay item, display item, figure item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Rebellion was made for fans of the Devil May Cry: The Animated Series (2007) and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the coloring step before/ after being printed is up to the customer’s preference!If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.2

Perimeter Shell 3

Fill 10/15%

Supports are needed

Speed 60-70%