IZANAMI - GHOSTRUNNER SWORD FOR COSPLAY 3D print model

All files are in STL format.

Model printed in parts.3 cutting variations for sword printing are available:

CUT TYPE 1 - STL file with the blade made for full printing (with the exception of the upper part that joins the small metal bar). The handle is sliced into 3 parts plus the upper part that joins the 2 small metal bars and a pin inside to fit de handle . The pipes and the small metal bars are the same in all cut types (They can be used as pins or if you prefer, they can be replaced with something of your choice).

CUT TYPE 2 - STL file with the blade divided into 5 parts (plus the upper part that joins the small metal bar) and the handle divided into 3 parts (plus the upper part too), with pins to fit them together. Pipes and small metal bars remain the same in all cut variations.

CUT TYPE 3 - STL file with the blade divided into10 parts and the handle divided into 6 parts (both have upper parts to fit the small metal bars), with pins to fit them together. (Important: This cutting model for 3D printing was made with a vertical cut to divide the sword in half, with pins to fit them together). Perfect for small 3D printers.

UNCUT - Full sword.

OBS: I recommend printing the smaller parts using a resin 3D printer. Or if you prefer, use something of your choice to give a better result.

Size: 958,52mm (95,85cm)

The STL files are able to be printed as a cosplay item.

This model is a dummy replica item for cosplay.

-For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Izanami sword was made for fans of the game Ghostrunner and also for everyone who likes swords in general. It can be used for both display and cosplay.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference!If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.