GRAVITON LANCE - DESTINY 2 3D print model

• All files are in STL format.

• Model printed in parts.

SLICED - STLs files archives compressed in RAR (Certain parts are hollow so that LED lights can be placed inside the Graviton Lance, as well as sound system):

• BARREL_DETAIL
• BARREL_PART_1
• BARREL_PART_2
• GRIP
• HANDGUARD_PART_1
• HANDGUARD_PART_2
• HANDGUARD_TOP_PART
• LED_TUBE_PART_1
• LED_TUBE_PART_2
• LED_TUBE_PART_3
• MAGAZINE
• RAIL_PART_1
• RAIL_PART_2
• RECEIVER
• RECEIVER_TOP_PART
• RECOIL_PAD
• RECOIL_PART_1
• RECOIL_PART_2
• RECOIL_PART_3
• SCOPE_GLASS_1
• SCOPE_GLASS_2
• SCOPE
• SIDE_LINE_HANGUARD (2 ITENS)
• SIDE_TUBES_BOTTON (2 ITENS)
• SIDE_TUBES_MID (2 ITENS)
• SIDE_TUBES_TOP (2 ITENS)
• TRIGGER

UNCUT - STL full uncut.

Size: 606mm (60,6cm)

The STL files are able to be printed as a cosplay item, display item, figure item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Graviton Lance was made for fans of the game Destiny 2 and also for everyone who likes weapons in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the coloring step before/ after being printed is up to the customer’s preference!If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.1

Perimeter Shell 3

Fill 10/15%

Supports are needed

Speed 60-70%