Dragon Lamp GoT with Flame

Dragon Lamp GoT with Flame 3D print model


Dragon with Flames - Lamp or Figure - GAME OF THRONES 3D PRINT MODEL

This is a model of Game of Thrones Dragons with different kinds of options.

  • with or without the Night King riding on its back
  • 2 different kinds of flames (one straight flamethrower and one in between that is on most pictures and can easily stand on a flat surface)
  • with or without the option of having it prepared for the insertion of an LED for lighting (pre-cut holes and easy assembly)
  • a high polygon version for detailed printing
  • a pre-cut versions of the dragon so it needs less supports and so you can print it bigger with you given surface are (wings separate and body in three parts)

Files contain different versions of the GoT dragons and flames. The dragons also included cut into smaller parts in STL format.

The model was meant to be like Viserion, the dragon that burnt down the wall, but since the other two look very similar you can print is as any of them - just scale Drogon a bit bigger. You can keep Rhaegal at the original size.


The main scale of the dragons is 250 mm (which fits diagonally on a Prusa sized printer) wide.

You can scale the model to any size you like. It is in high detail so you can enlarge if you like.


We printed the dragon with Fillamentum's PLA. We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Some parts of the dragon definitely need supports. For reliable printing, we also recommend setting a brim to some of the parts. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer. For printing the straight flame without supports in the top part to print for a lamp I recommend splitting the print into two processes where you would use supports in the bottom part to be able to print the vertical surface and then leave the straight part without supports so it looks nicer and carries light better.

We try to make the models in a way that uses as little support material as possible.

This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:


Item rating
5 0
taz1956 2022-09-28 21:09:13 UTC
So far, so good. Detail is amazing printed on Ender 3, 120% feed rate, dark green PLA+, 60c platen, 205c hot end. 1 day, 4hrs, 31 min. with support, 100% infill.
jonn29-jp 2020-11-18 06:29:57 UTC
Excelent Bro, thanks Regards from Panama, your are de Best Bro
Dragon Lamp GoT with Flame
Editorial No Ai License 
Dragon Lamp GoT with Flame
Editorial No Ai License 
Response 97% in 14.9h
3D Modeling
3D Print Modeling
Low-poly Modeling

3D Model formats

Format limitations
  • Stereolithography (.stl)464 MB

3D Model details

  • Publish date2019-06-10
  • Model ID#1994980
  • Ready for 3D Printing