DESCRIPTION

Rigged S-400 Triumph (NATO reporting name: SA-21 Growler) is an air defence missile system developed by Almaz Central Design Bureau of Russia.

Rigged and animated all the movable parts, missile launcher, tires, truck, trailer, etc.

Textures resolutions is 2K.

Ready for game engine

The S-400 Triumph (NATO reporting name: SA-21 Growler) is an air defence missile system developed by Almaz Central Design Bureau of Russia. The new system replaced the S-300P and S-200 air defence systems of the Russian Army.

The S-400 was developed as an upgrade of the S-300 series of surface-to-air missile systems. The system entered service in April 2007 and the first S-400 was deployed in combat in August 2007. Russia set up four S-400 regiments defending national airspace in the Moscow region, the Baltic exclave of Kaliningrad, and the Eastern Military District.

The air defence units of Southern Military District were rearmed with advanced S-400 Triumph by the end of 2012.

The S-400 Triumph air defence system integrates a multifunction radar, autonomous detection and targeting systems, anti-aircraft missile systems, launchers, and command and control centre. It is capable of firing three types of missiles to create a layered defence.

The system can engage all types of aerial targets, including aircraft, unmanned aerial vehicles (UAV), and ballistic and cruise missiles, within the range of 400km at an altitude of up to 30km. The system can simultaneously engage 36 targets.

The S-400 is twice as effective as the previous Russian air defence systems and can be deployed within five minutes. It can also be integrated into the existing and future air defence units of the airforce, army and navy.

S-400 Triumph radarsThe fire control and target tracking radar of the S-400 is the 92N6E (Nato Codename: Gravestone). The radar is based on the MZKT-7930 8×8 vehicle. The 96L6 Cheese Board 3D surveillance and tracking radar is optionally carried by the same vehicle when the S-400 battery is deployed autonomously.

The 91N6E Big Bird acquisition and battle management radar of the S-400 is based on the 8×8 trailer. The radar can detect and track aircraft, rotorcraft, cruise missiles, guided missiles, drones and ballistic rockets within the distance of 600km. It can simultaneously track up to 300 targets.

Launch vehicle of S-400 missile systemThe SP85TE2 launchers are based on the BAZ-64022 6×6 tractor truck or MAZ-79100 series Transporter-Erector-Launcher (TEL) vehicle. The TEL vehicle can carry up to four launch tubes holding a mix of missiles.

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
There are no reviews or comments yet. Please be the first one to write it.
BEST PRICE GUARANTEED
Found this model cheaper on another marketplace? Let our support team know - we’ll match it.

Rigged S-400 Missile n Radar Low-poly 3D model

Royalty Free License
Hire
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
Native file format
MAX2 files
Size: 5.96 MB
Default (Scanline) 1 | 202
Default (Scanline) 1 | 2017
Exchange formats
BLEND
Blender<br />Version: 3.6 - Renderer: Cycles 1<br />File Size: 134 MB
FBX
Autodesk FBX | 3 files<br />Version: 20<br />File Size: 28.6 MB
UASSET
UnrealEngine<br />Version: 4.24<br />File Size: 53.8 MB
TEXTURES
Textures<br />Version: 1<br />File Size: 35 MB
OTHER
Other<br />File Size: 35 MB
Verified by CGTrader
Verified models are of higher quality as they have
passed CGT Standard technical and visual checks,
making them more professional-grade 3D assets.
Learn more.
FBX
This FBX file has successfully passed the CGT Standard technical and visual checks. The verification results are detailed in the section below.
File & scene
Binary FBX
Binary FBX file is more compact and faster to load and process.
Learn more
No unsupported objects
Unsupported objects:
- Lights
- Cameras
Learn more
Geometry
No N-gons
N-gons are polygons with five or more sides which might cause issues in certain processes like rendering or animation. Learn more
No faceted geometry
Faceted geometry uses flat surfaces without smoothing, which can look unrealistic on curves.
Learn more
Manifold geometry
Manifold geometry ensures all surfaces are properly connected, avoiding issues like edges shared by more than two faces.
Learn more
Textures & material
PBR textures
PBR textures simulate how light interacts with materials, making the model look realistic under different lighting.
Required PBR textures:
- Base Color
- Roughness
- Metalness
- Normal
Learn more
No embed textures
Embedded textures are stored inside the model file, increasing its size and sometimes causing compatibility issues.
Learn more
Square textures
Texture aspect ratio is the width-to-height ratio of a texture. Expected texture aspect ratio: 1:1
Learn more
Power of 2 texture sizes
Textures with dimensions in power of two (e.g. 512x512px, 1024x1024px) are used to optimize performance and memory usage.
Learn more
Assigned materials
Materials are applied to the 3D model to allow visualize a model's surface properties and appearance.
Learn more
UVs & naming
No UV overlaps
UVs overlap when multiple points on the 3D model's surface are mapped to the same point on the UV island causing texture stretching.
Learn more
UV unwrapped model
A UV unwrapped model means its 3D surface is flattened into 2D space, allowing textures to be applied accurately.
Learn more
Allowed characters
Allowed ASCII characters: a-zA-Z0-9-_
Learn more
Provided by designer
Information and details shared directly by the model's designer.
3D Features
The model includes animations (movement or actions) that can be played in supported software or engines.
The model has a skeleton or bone structure, making it ready for posing or animation.
PBR
Uses Physically Based Rendering materials, which give the model realistic lighting and surface properties.
Textures
The model includes image files (textures) that add color, patterns, or detail to its surfaces.
Materials
The model has material settings that define how surfaces look (color, shine, transparency, etc.).
UV Mapping
The model's surfaces are mapped to a 2D image, allowing textures to display correctly.
Plugins Used
Some external plugins were used to create the model. These may be required for full functionality.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is not 3D printable
The designer indicates this model is intended for digital use only (rendering, animation, or AR/VR) and not for 3D printing.
Geometry
Polygon mesh
A model built from polygons (triangles or quads) connected in a mesh.
50715 polygons
The total number of polygons (flat shapes) that make up the 3D model.
/ 30520 vertices
The number of points (corners) that define the shape of the model's polygons.
Unwrapped UVs
Publish date
Model ID
Chat