Inverted Ionic Vortex Electro Motor - Concept.
Look i dont know what to call these things anymore, so here's a sort of explanation. in the images there is a symbolical model of the most simple electro motor, just to demonstrate what effects i am using, before i explain how i am using them and why it is so interesting.
A normal electro motor in its most simple form, is made up out of a battery, and a simple magnet is placed under it, and a wire is then connected to the top of the battery, moves sideways outward, downward, and then back in again, to be connected under the magnet again, completing the electrical circuit. this will make the electrical wire turn around it's center axis, like a electro motor.
Now, instead of a wire, i use the entire hemisphere shape, putting a positive charge on the top part of the top disc, and a negative charge around the bottom of the top hemisphere, forcing ions to follow the cups shape out and downward, then back inward, and upward again completing its own [1/2] circuit. this will make the entire cup turn around its center axis, so i created a use for this effect, by making the cups have a air compressing vortex shape mounted onto them, making the entire vortex hemi turn, and push out air outwards.
Same goes for the bottom cup accept for its orientation is completely upside down and inverted, HOWEVER, in this instance we could choose to completely invert the system, or have the ions flow down from the top of the bottom of the inverted cup, to its relative bottom which is located lower in actual space, with the smaller hole in it, as we want to continue the created ionic flow downwards a second time. but just plain inverted would also have a function as well.
Now, since these vortexes are counter spinning through the centrally fixated and balanced out 6D gearbox, we eliminate precession effects, and we can even assist the device in its turn, or even better [re]generate power from the induced horizontal axial turn of these 4 plain electromotors/generators. [we can even tap the two vertical axis as well, increasing efficiency even further, if one really wanted to] both cups even though counter spinning share the exact same function, namely compression of air and pushing it sideways. if you placed this device in the center of two opposing wings, they would both push air outwards, which then needs to be guided downward by shape, forcing the [ionic] [air] flow downward, in turn creating lift for the object itself. it generates omnidirectional lift pushing air over a 360 degree wing design, creating lift all around the circular wing design. if you place the vortex device in the center of a omni directional wing, lift is created all around the centrally located vortex device by pushing air over and under the 360 degree wing. even the charged ions will follow along the vortex shape downward and with a twist, generating axial spin.
i cant explain it any better at this time, i have already provided 2D drawings of this ionic loop, but ill have to keep working on this concept as it gets harder and harder to name and demonstrate these concepts. please let me know if you 1: understand the concept 2: if you think t would work 3: if you think it is useless or any other constructive criticism is duly welcomed.
i live off of comments, your likes and your tips. thank you for watching and reading.
