LArendsian Optical Solar Laser Light Drive - Concept
One center rotation platform, an axle I power and turn with laser light, generating rotation, performing work. 4 lasers all placed under their own angle of insider, shine straight into the drive.
The laser meets a widening or diffusing lens, and finally plastic cone, plated inside with tin foil. The concept will make the laser light bounce around and reflect inside the plastic filled up cones, actually using more light for creating heat there locally and therefor pressure or controlled expansion, and in turn creates a rotation for the center axle which we can use for other ends.
The principle is based on a crooks radio tube, this is an evolution on the same concept. We can expand the amount of lasers and receptors size and or using more angles of incidence. We can make the laser light stronger by having it move through a plastic cylinder filled with little focusing lenses. The stronger the lasers, the more heat and pressure, the faster the rotation of the drive.
It’s not entirely free as the solar drive needs parts but i design it so that anyone can print and replicate the drive. Info not have thick fiber cables, but maybe tinfoil reflective material in the cables can help demonstrate my principle. Nothing is free, but it sure comes close. Fiber optic cables are pretty expensive perhaps have to find something to replace. My disc shaped craft already has the two correct lens shapes, but include just place the drive in the sun for it to work for testing first. We can even combine two inverted drives, driving two counter spinning rotors, doubling output of effect. Got it.We can even stack lasers on top and stack receptors on top of each other.
When would a laser drive have as an advantage besides it being created electrically. Now i need to find a way to use the suns light, guiding the sun into the drive from 4 or 8 sides, creating an octo laser drive. Sun is free and once you have the lenses and the casing the sun keeps on coming. I need a sun tracker perhaps and a way to guide and Bend the sun light, perhaps glass fiber cables and a disc capturing the sun, dividing it over four or eight entrances to the drive. We need a solar drive, think dennis.
Ok, got it. Same exact principle as an eye ball. Place a diffusing lens, onto a reflective cup, then Fiber nerves cables capturing the reflective bouncing light from inside the cup, transporting it in bundles, feeding the drive with focused solar power. My entire drone is made of two lenses, if i fit the lower cup lens with fiber cables and redirect thr light back to the drive, I can fly on free solar power, all day. Follow the sun and you will be able to remain in the air, for free.
The glass dome shapes, also are protection by internal reflection, against incoming laser attacks by absorption of the energy, bending it internally of its walls and using it to power my solar drive. Now, to make a model again.
all the needed shapesto bild its bones are in the kit.
i live off of comments, your likes and your tips. thank you for watching and reading.
