This 3D model was originally created with Sketchup 8 and then converted to all other 3D formats. Native format is .skp 3dsmax scene is 3ds Max 2016 version, rendered with Vray 3.00 Argo Architects presents a design for an intercontinental maglev train, which travels at supersonic speed through a vacuum tube. The magnetic trains can thereby reach a speed of over 3000 km/ h. Thus, the Paris-Washington takes only about 3, 5 hours. Maglev routes are mostly on land and traverse the oceans only to the shortest routes. On the USA- Europe route, for example, the longest water transverse end section is only about 500 Km long. The modules of the route are prefabricated on land and towed to the installation site. There, they are anchored by robots on the seabed. Energy is supplied enviroment- friendly by waterpowered sea flow power plants every 450m.The magnetic levitation drive automatically. In normal operation, the modules are not entered, only for maintenance purposes. Technically, this concept is realistic but economically, is much too expensive.Everything on this design is very detailled, even the train has a full interior!PLEASE RATE!