Brick Firepit With Metal Lining and Screen 3D model

The model is of a real-world scale firepit (34 Inches Wide and about 10 Inches Deep) with a base ground model.

-** The ground ** has a separate model which is the sand layer which goes under the firebricks.

• *The mortar * is a single textured mesh to act as a whole for the firepit.
• The bricks are separate but combined to one mesh with non-overlapping Uvs but one UV set.
• *The Fire lining * which is the disc around the firepit is separate to the grate at the bottom. They both have separate Uv maps because the grate is made up of combined meshes but with non-overlapping same Uvs.
• The dome is low-poly and achieves the grated look thanks to a transparency map of a mesh applied to it. The transparency map is attached but it needs to be inverted to work i.e white to black.

The model has a number of 2k textures for the objects in the scene:

1. Ground
2. Sand layer
3. Bricks
4. Mortar
5. Lining
6. Lining Mesh
7. Dome

The textures included are:

1. Color/ Albedo
2. Rougness
3. Normal
4. Metalness (Dome and Lining)
5. Transparency (Dome)

*Note: The dome has two separate textures for the grate and the model itself so you will need to apply the mesh material to the faces of the metal grate. *