Hi friends,

here is my new project for WWII wargaming tables.It is a huge steel bridge in 28/35 mm scale. The bridge is nicely detailed and has sidewalks on the sides. For the surface, I recommend a layer of modeling compound and using a roller to shape the surface, for example.The size is 70 cm long, 35 cm wide and 15 cm high at the highest point.But don't worry, the bridge is divided into parts so that it can be printed on a 20x20cm printing surface.Printing is simple and completely support-free. The entire bridge is a large kit that is connected using M3 screws (the list of connecting material is part of the files).1 kg of filament was needed for printing, it depends on the settings. The bridge is really strong and can be used as a bridge.The bridge can be divided into two halves for portability and storage.When you go to play, you screw in 8 screws and you can play.I printed from PLA, but it's no problem to use PETG. The parts do not contain any supports or large bridging.Enjoy my work and liven up your gaming table with a really nice piece of terrain.

Have a nice day, Lukas