This is a high quality pack contain models:

• Capuccino Assassino
• Chimpanzini Bananini
• Bombombini Gusini
• Lirili Larila
• Brr Brr Patapim
• Spijuniro Golubiro
• Tralalero Tralala

This models is designed to be an easy and enjoyable print! Here are some recommended settings to get you started:

Print Settings:

• Supports: Not included. Add them in your slicer if required.
• Layer Height: 0.16mm - 0.2mm (0.16mm is great for detail, 0.2mm for a faster print. You can experiment based on your preference.)
• Wall Count / Perimeters: 2-3 (Using 3 walls is generally recommended for good strength, but 2 can also work.)
• Infill: 20% (Adjust to your preference for desired strength vs. print time.)
• Brim: Generally not required if you have good bed adhesion. You can use a small brim if you notice any warping with your specific filament or printer.

Models Details:

• File Format: STL

• Approximate Dimensions:

  • Capuccino Assassino:
  • Metric: 112.5mm (X) x 67.5mm (Y) x 109.2mm (Z)
  • Imperial: 4.43 in (X) x 2.66 in (Y) x 4.3 in (Z)
  • Chimpanzini Bananini:
  • Metric: 79.7mm (X) x 81.3mm (Y) x 103.3mm (Z)
  • Imperial: 3.14 in (X) x 3.20 in (Y) x 4.07 in (Z)
  • Bombombini Gusini:
  • Metric: 138.5mm (X) x 83.8mm (Y) x 70.6mm (Z)
  • Imperial: 5.45 in (X) x 3.3 in (Y) x 2.78 in (Z)
  • Lirili Larila:
  • Metric: 111.1mm (X) x 50mm (Y) x 101.8mm (Z)
  • Imperial: 4.37 in (X) x 1.97 in (Y) x 4 in (Z)
  • Brr Brr Patapim:
  • Metric: 80.6mm (X) x 55.2mm (Y) x 109.6mm (Z)
  • Imperial: 3.17 in (X) x 2.17 in (Y) x 4.31 in (Z)
  • Spijuniro Golubiro:
  • Metric: 64.6mm (X) x 78.9mm (Y) x 111.7mm (Z)
  • Imperial: 2.54 in (X) x 3.1 in (Y) x 4.4 in (Z)
  • Tralalero Tralala:
  • Metric: 112.5mm (X) x 67.5mm (Y) x 109.2mm (Z)
  • Imperial: 4.43 in (X) x 2.66 in (Y) x 4.3 in (Z)

Feel free to use any filament color and type (PLA works great!) you prefer to bring your creation to life.

Happy printing!