This 3D model was originally created with Sketchup 8 and then converted to all other 3D formats. Native format is .skp 3dsmax scene is 3ds Max 2016 version, rendered with Vray 3.00 Opebus is a bus that can fly a maximum of 60MPH. It is a computer-piloted bus that is programmed in an assigned route. The driver drives the Opebus around the city, while the sensitive computer system remembers how to move the Opebus around. Then the driver goes away, and turns the computer system into the autopilot. The next day, the Opebus starts itself up at the same time as before, and goes out for the route. On each stop, the Opebus opens the seats and waits for 5 minutes. Then it goes on. The seats are not closed only if a weight of 10 Kilograms is applied on the seats. The Opebus by default goes with stoping through the intersections. But when there is a red sign or stop sign, the traffic systems comes on if the Sensystem® sees a red color. Or, the driver could manually set an intersection and the time for the Sensytem® to activate. The Opebus if fully ecologically-clear. The new engine system that sets a speed of 50MPH for cruising makes the Opebus quiet and cozy. The Opebus can handle 12 passengers and a total weight of maxmium of 100 Kilograms per seat. In total, the engines handle 1,200 Kilograms of weight. The Opebus is while stoping touching the ground with the belly and it opens the seats up if closed and also puts out the simpliest gear system. The Opebus has soft anti-gravity system above it's belly that slightly lifts the Opebus to an altitude of 10 feet. Then it slowly starts to move towards the next stop. The Opebus will be used manily in Crowne Springs.