3D Printer Fume - Smell Exhaust Window Adapter 3D print model

Title

3D Printer Fume/Odor Exhaust Window Adapter – Threaded Clamp, 2” Hose, Blind Screw Cap | Multi-Size + STL & 3MF (pre-sliced)

Short Description

Two-piece, threaded clamp adapter for glass (and optional wall) mounting. Includes a 2” hose outlet and screw blind cap. Ships with a fixed STL plus multiple compatible 3MF variants (different hole diameters/thickness options).

Full Description (updated)

Purpose: Vent 3D-printer fumes outdoors via flexible ducting.

Mechanism: Two-piece threaded clamp installs from both sides of the drilled opening for a tight, low-leak fit.

Outlet: 2 inch (≈50.8 mm) hose interface.

Closure: Screw blind cap fully seals when not in use.

Formats:

STL: The fixed canonical model.

3MF: Multiple pre-sliced and dimensioned variants for different hole diameters/glass (or wall) thicknesses.

Use Cases: Designed for windows; can be adapted for wall pass-through with anchors and sealant.

What’s Included

Front ring (female thread) – STL + multi-size 3MF

Rear ring with 2” outlet (male thread) – STL + multi-size 3MF

Blind screw cap – STL + matching 3MF

The 3MF bundle contains several hole-ID and thickness scenarios.

Picking the Right Variant

Measure the hole diameter.

Choose the variant whose inner diameter gives a slight clamp margin.

Match your glass/wall thickness to the 3MF variant notes.

Avoid uniform scaling; use the provided variants to preserve thread tolerances.

Print & Install Notes

PETG or ASA/ABS; 0.2–0.28 mm layers; ≥3–4 perimeters; 20–35% infill; supports usually unnecessary.Glass drilling is hazardous—use proper bit, low RPM, water cooling, PPE. For walls, use anchors and silicone sealant. Do not overtighten.

License

Personal/commercial prints allowed; file resale/redistribution prohibited.