Transform any room into a charmingly spooky space with this Glowing Ghost Lamp cover. This model is hollowed out specifically to be placed over a small LED light, casting a soft, ethereal glow. It's the perfect centerpiece for your Halloween setup, a whimsical night light for a kid's room, or a unique decoration for your desk all year round.Create a cozy and fun atmosphere with this easy-to-print glowing friend!

(Includes 1 STL file for 3D printing)

IMPORTANT SAFETY NOTICE:

Use this model ONLY with LED lights that do not generate heat, such as LED tea lights, fairy lights, or a small LED base. DO NOT USE with real candles or incandescent bulbs, as this poses a serious fire hazard.

This version of the ghost is designed to be a hollow lamp cover. To print it successfully, please pay close attention to the support settings.

• Supports: Yes, Required (not incluted)Supports are necessary to print the inner top surface (the ceiling) of the ghost. Without them, the print will fail.

• Pro Tip: I highly recommend using Tree Supports (available in Cura and other slicers). They are much easier to remove from the inside of the model and use less material.

• Layer Height: 0.12mm - 0.2mmFor a standard quality print, use 0.2mm. For the best and smoothest surface finish, 0.12mm is recommended.

• Infill: 0%The model is designed as a hollow shell, so no infill is needed.

• Walls (Wall Line Count): 2-3For a nice glowing effect, use 2-3 walls. This provides enough strength while allowing light to shine through brightly.

• Filament:For the best glow, print with White PLA. Translucent or natural colored filaments also work great. For added safety with LEDs, PETG is a good alternative as it has a higher heat resistance.

• Plate Adhesion: Not neededThe model has a large, flat base that provides excellent adhesion. A brim or raft is not necessary.

Happy printing!