Front grille for Chevy GMC C10 1984 3D print model

A custom design for the front grille of the 1984 Chevy C10. It can also be used on GMC, K10 models, etc.

The ZIP file comes with the STL of the grille, and also the headlight lenses, which can be printed with transparent resin.

The file is in 1/25 scale with the standard measurements of the best-known models on the market, but may require minor adjustments.

For other scales you can use the scale table below:

1/64 - 39.0625% (Not recommended)1/32 - 78.125% (Not recommended)1/25 - 100%1/24 - 104.1667%1/18 - 138.8889%1/12 - 208.3333%1/10 - 250%1/8 - 312.5%

Printing Tips:For the front grille you can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.As for the lens, the ideal is to use 40μm layers, and print the model standing up (as if applied to the front grille), using the solid base as support for the supports.Other printing details depend on the resin you use and the printer, but do not require special care.