Lantern Corps LED rings Set All 9

Lantern Corps LED rings Set All 9 3D print model


Hello everyone!

This is set of all 9 LED rings in one.

Seven corps will be born. Seven corps will shine their light brightly. Seven corps will be at war

I developed this model for a 2032 battery and a 3528 SMD led. Two holes for wires are made in the ring, at the bottom there is a seat for a button with a 6x6mm fixation. Connecting the LED via a 100 ohm resistor.

The ring is designed in such a way that it is easy to replace the spent battery. Cap and ring has thread. To save battery power when no light is needed, there is a hole for button to turn on/off.

If you do not want to solder, then you can attach a 3mm LED directly to battery and put it inside the ring without a holder.

The sizes are for US, you can easily find a table for comparing sizes in your country on the Internet.

To make it good, I printed it with translucent resin on SLA printer, sanded it, soldered, spray with good gloss varnish. The cap was layed with epoxy resin + white ink, sanded it and also covered by varnish.

If you have any questions, please write.


For personal use only! If you want to resell my prints - check my Patreon or write me ( ).

My craft is not an officially licensed product it has more than 35% differnerts from original. The item is printed, assembled and painted by me. It can be viewed only like FAN ART, Fan Art is protected under Fair Use. Original character and all rights for this character belongs to their owners. If you have any concerns, please contact me before placing any reports

Item rating
0 0
Lantern Corps LED rings Set All 9
Editorial No Ai License 
Lantern Corps LED rings Set All 9
Editorial No Ai License 
Response 80% in 11.3h
3D Modeling
3D Print Modeling
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl) (9 files)32.2 MB

3D Model details

  • Publish date2022-08-30
  • Model ID#3961668
  • Ready for 3D Printing