Hello everyone!

Let me introduce you my design of Black lantern corps (Nekron) ring for led light.

Black {Death}The Blackest Night falls from the skies,The darkness grows as all light dies.We crave your hearts and your demise,By my black hand, the dead shall rise!

I developed this model for a 2032 battery and a 3528 SMD WHITE led. Two holes for wires are made in the ring, at the bottom there is a place for a button with a 6x6mm fixation. Connecting the LED via a 100 ohm resistor.

The ring is designed in such a way that it is easy to replace the spent battery. Cap and ring has thread. To save battery power when no light is needed, there is a hole for button to turn on/off.

If you do not want to solder, then you can attach a 3mm LED directly to battery and put it inside the ring without a holder.

The sizes are for US, you can easily find a table for comparing sizes in your country on the Internet.

To make it good, I printed it with black resin on SLA printer, sanded it, soldered, spray with good gloss varnish. The cap was layed with epoxy resin + white ink, sanded it and also covered by varnish.Also, you can print it with good quality FMD printer.

If you have any questions, please write.

MAIN NOTE:

For personal use only! If you want to resell my prints - write me.

My craft is not an officially licensed product it has more than 35% differnerts from original. The item is printed, assembled and painted by me. It can be viewed only like FAN ART, Fan Art is protected under Fair Use. Original character and all rights for this character belongs to their owners. If you have any concerns, please contact me before placing any reports