Lighthouse LED Lamp 3D print model

Height of the finished lamp 308 mm. This lamp is easy going. You need the M3 screws (3 mm diameter) and nuts to them, adhesive, ceramic cartridge for LED bulbs (G9), switch and a not a lot of patience. I used ABS and SBS (transparent) plastics. You can use any other plastic. Details are printed single-layer seal (vase) (06_Glass.stl, 10_lampshade.stl, 12_Tube_SBS_01, 12_Tube_SBS_02, 13_Tube_ABS_01, 13_Tube_ABS_02) 1.2 mm thick should be. I used the CURA program.