Unleash the creature of the night with this stunningly stylized Bat Skull figurine. A perfect blend of natural anatomy and monstrous fantasy, this piece is designed to be a standout addition to your Halloween decor or gothic collection.

With its exaggerated fangs, intricate details, and imposing ears, this skull serves as a fantastic desk ornament, a trophy for a monster hunter's collection, or a prop for your next tabletop RPG session. The model is also a painter's dream, offering countless opportunities to bring out its creepy details with washes and dry brushing.

Print this fearsome trophy to add a touch of vampiric horror to any room!

(Includes 1 STL file for 3D printing. This is a digital file, not a physical item. For personal use only.)

This is a complex model with significant overhangs that require careful support generation for a successful print.

• Supports: Yes, Absolutely Required.This model cannot be printed cleanly without supports. You must generate them in your slicer. Supports will be needed under the fangs, jaw, cheekbones, and inside the large ear cavities.

• CRITICAL ADVICE: Tree Supports are STRONGLY RECOMMENDED. Due to the complex organic shapes, standard supports will be very difficult to remove without damaging the model. Tree supports will be much easier to detach and will preserve the fine details.

• Layer Height: 0.12mm - 0.16mmTo capture all the subtle curves and details, a finer layer height is recommended. 0.16mm is a great balance between quality and speed.

• Infill: 10-15%A low infill is sufficient for this display model.

• Walls (Wall Line Count): 3-43 to 4 walls will ensure the fangs and other delicate parts are strong.

• Plate Adhesion: BrimA brim is highly recommended to keep the model securely anchored to the build plate, especially around the base and fangs.

• Painting Tip:This model looks incredible when painted to resemble bone. For the effect in the photo, print in a light color like bone white or light grey. Then, apply a dark wash (thinned black or brown paint) to fill in the crevices, and wipe away the excess. Finally, dry brush a lighter color over the top to make all the raised details pop.

Happy printing!