[Summary]

This product is a pen holder based on a polycube motif of seven cubes joined together. As can be seen, it has a very simple shape and can easily be printed out on a 3d printer. However, it may take some time to print out due to its relatively large size. In my environment, it took more than 10 hours.

Incidentally, the polycube that served as the motif - a 2 x 2 x 2 polycube with one cube removed - can be parallel shifted to fill the space. I don't recommend it, but if you have time, it might be interesting to try printing several prints of this product in 1/2 scale to see.

[Tips for 3d printing]

• It is recommended to print at a scale of at least 1/2. (*1)
• No supports required.
• The minimum print area size required for 3d printer modeling is 80.0mm(X axis) x 80.0mm(Y axis) x 80.0mm(Z axis). (*2)

*1: There is no guarantee that the product can be used as a penholder when printed at a size smaller than 1x.*2: When printed at 1x size.

[Disclaimer]

Please use this product for the correct application for which it was designed. In particular, parents or guardians should supervise the use of this product by younger children (under 10 years old). The Creator shall not be liable for any damage caused by the use of this product.