3D MODEL DESCRIPTIONHello friend, today I present a small lamp, but especially easy to print, in fact, printing does not require any kind of support If you print the cover, then you need a little support, mount a canvas to your liking, then you don’t need supports, even for the cable entry hole.

There are two versions of lights, print the one you like best.

The dimensions of the lamp are X120 x Y120 x Z200, the diameter where the support for the bulb will go is 34mm and the thread 10mm.

The cover in the picture is for embellishment and to make the idea of how your lumino will look like once printed, also I want to remind you, that the cover has a diameter of 278mm x 165mm high, so the latter, needs a larger printer, or you can adapt another one from any lamp shop.

The bulbs for this lamp must be model E14, as well as the lamp holder, must be model E14, to be able to screw on the lamp.

On the lamp you can print my lamp cover, or, buy one of canvas, the color you prefer from any specific store, or you can find many from Leroy Merlin, online also on amazon and aliexpress with little money.

I also want to remind you, that all my designs are interlocking, and have a tolerance of 0.50mm standard tolerance of all printers, if you like many others do not know what tolerance your printer has, I suggest you download my tolerance test, It’s on my profile.

As always I want to thank you for spending your time in viewing my project, and if you find it interesting, I suggest you take a look at my profile cults, because you will find a lot of interesting projects, And I’m sure you’ll find something for you, and I also remind you to leave me a like if you appreciate my work.

Good press friend and become a follower of mine

3D PRINTING SETTINGSLayer 0.15 or 0.20Infill 5%Top and Bottom Layer 4Perimeter Layer 3No supportSpeed 50/60 mm/s