Scale: 1/87 (H0)

Size: x=199,22mm; y=216mm; z=1,01mm

Printing technique: FDM two colors print: (1) bricks color /or dark red (2) black /or dark gray

My printer: Anycubic Kobra S1 with one AcePro

Note: the brick mat can be easily bent and cut with scissors or a scalpel

What you'll receive after downloading the project:

1) STL file: a single-file (one color) of the entire mat in a single STL file. You can print it on a single-color printer.

2) 3MF file: project Anycubic Next Slicer (based on Orca Slicer). This file contains a ready-made project for printing on a Kobra S1 printer equipped with one Ace Pro.
I assume that the project can be printed on other color FDM printers, not only the Anycubic Kobra S1, but I only have this printer and I have no way to verify it.

If you want to make sure you can print this design, download as trial the free model H0 Railway Crossing Hut (4Kobra4colors):

https://www.cgtrader.com/free-3d-print-models/hobby-diy/hobby-accessories/h0-scale-railway-crossing-hut-4kobra4colors-fdm